Skip to content
10% OFF H655BT | Hybrid Active Noise Cancelling Bluetooth Headset
10% OFF H655BT | Hybrid Active Noise Cancelling Bluetooth Headset

Wireless Bluetooth headset connection and solutions to common problems

Nowadays, more and more people like to use wireless Bluetooth headset because it not only can easily solve the problem of tangled wires, but also can allow users to move and operate the device more freely. But for some users who have not used wireless Bluetooth headset, they may encounter some connection problems. This article will introduce how to connect wireless Bluetooth headset and the solutions to common problems to help you better understand and operate wireless Bluetooth headset.


First, wireless Bluetooth headset connection

Turn on Bluetooth: First of all, you need to turn on the Bluetooth function of your device, you can find the Bluetooth switch in the control panel or settings.

Connection mode: Many wireless Bluetooth headsets need to be in a specific mode when connecting, this mode can be on or other specified mode. The headset's instruction manual has detailed descriptions.

Scan for connection targets: When the device's Bluetooth is turned on, the headset needs to perform a search and scan for devices and determine which device to establish a link with. This step can usually be done at with an audible prompt or light indication on the headset.

Connecting devices: After searching for a target device, the headset can be paired and connected to the device. The headset's instruction manual will detail how to connect various different devices, as well as additional steps that may need to be taken.



Second, the solution to the common problems of wireless Bluetooth headset


The headset can not be turned on

If the headset can't be turned on, you first need to check if the battery on the headset is low, if there is no power, you can try to charge it by connecting the charging cable. If the headset has been charged but still can not be turned on, you can consider checking whether the headset has been damaged or whether there are other hardware problems.


The headset can not connect to the device

If the headset does not connect to your device, the first step is to make sure that the Bluetooth function of the device is turned on and that the device supports connection to the headset. If everything is fine, try reconnecting the device or turning the Bluetooth function of the device off and back on again to connect. If you still can't connect, you can try resetting the headset to factory settings and then reconnecting.


Unstable headset connection

If your headphones are prone to dropouts or unstable signals when connected, first try to check if the distance between the headphones and the device is too far, or if there are other obstacles blocking the two. Consider shortening the distance between the device and the headset, or use another headset while the music is playing to test if the same problem exists.


Headphones sound noise

If the headphones are noisy when playing music, it may be caused by a bad connection problem between the headphone cable and the interface. You can try to remove the dust and dirt from the headphone head or around the headphone cable port, and then reconnect it for testing. In addition, if your device has been used for a long time, it may be caused by equipment problems, we recommend trying to update the device system or replace the device with another one.


Headset sound is too small

If the headphones sound too low when playing music, it may be due to the headphone volume setting is too low or the device volume setting is too low. You can try to turn up the headphone volume and device volume and then test it. If you are still stuck with the same problem, you can try to bring the distance between the headphones and the device closer to check if there is any other strong interference.



Wireless Bluetooth headset has become one of the important devices in people's daily life, but problems encountered in the process of use cannot be avoided. This article helps readers to better understand and use wireless Bluetooth headset by introducing how to connect it and how to solve common problems, and to be able to deal with it quickly when problems arise.


Previous article Game headset care and maintenance skills
Next article Installation and operation process of home projector