Skip to content

M7083 MANUAL

What’s in the Box

‑ 1 × HAVIT M7083 Smart Ring

‑ 1 × Magnetic Charging Cable

‑ 1 × Quick Start Guide

Power On

The smart ring will automatically power on when connected to the charging case. No separate power‑on button is available.

How to Wear

  1. Select a proper‑fit ring size. Do not wear it too tight.
  2. Recommended fingers: index finger, middle finger or ring finger.
  3. Position the sensor against the inner side of your finger for accurate health readings.
  4. Keep the skin and sensor surface clean and dry for best performance.

App Download & Bluetooth Pairing

  1. Download HAVE RING from App Store (iOS) or Google Play (Android).
  2. Turn on your phone Bluetooth, open the HAVE RING App.
  3. Tap “Add Device” and select M7083 from the searching list.
  4. Follow in‑app prompts to complete pairing.

Note: Keep the ring charged during first‑time pairing.

Charging Instructions

  1. Align the magnetic charging cable contacts with the ring’s charging contacts.
  2. Red LED flashes = Charging
  3. Green LED flashes = Fully Charged ‑ Input: 5V USB power source 

Main Functions

‑ 24‑hour real‑time heart‑rate monitoring

‑ Blood‑oxygen (SpO₂) measurement

‑ Automatic sleep tracking & sleep quality analysis

‑ Daily activity / step counter

‑ Multi‑sport modes recording

‑ Off‑line local data storage (sync data via App)

Important Notes & Safety Warning

  1. This device provides health data for reference only. It is NOT medical equipment. Data cannot replace professional medical diagnosis or treatment. Please consult a doctor for physical discomfort.
  2. Do not disassemble, squeeze or puncture the ring. Keep away from fire and extreme high/low temperature environments.
  3. If skin redness, itching or swelling occurs while wearing, please stop using immediately.
  4. Waterproof rating: 5ATM. Suitable for hand‑washing and shower. Not for hot‑spring, sauna, diving or high‑pressure water impact.
  5. Keep the product out of reach of small children.
  6. Please dispose built‑in battery following local electronic‑waste regulations.

Troubleshooting

❏ Cannot connect / find device

  1. Confirm ring has sufficient battery power.
  2. Restart phone Bluetooth and reopen HAVE RING App.
  3. Remove old pairing record in phone Bluetooth settings and re‑pair.

❏ Inaccurate health data

  1. Ensure sensor fits tightly against inner finger skin.
  2. Clean sensor and finger skin; avoid wearing too loose or too tight.

❏ Will not charge

  1. Clean magnetic contacts of ring & case to remove sweat, dust or dirt.
  2. Swap another standard 5V USB power adapter.