Skip to content
10% OFF H655BT | Hybrid Active Noise Cancelling Bluetooth Headset
33% OFF H655BT | Hybrid Active Noise Cancelling Bluetooth Headset

M9045

M9045 Product Manual

Pairing Settings consider ations

InSettings-Notifications,open APP Notifications

 

Watch Functions

Alarmclock

After the watch and APP are connected, you can set a single alarm clock and a circular alarm clock on the APP side, and you can set up to 8 alarm clocks.

Secondary Watch

Click the start of the start button to start, click the pause button to timely stop, and click the reset button to take the time to zero. A maximum of 8 data can be saved.
Blood Pressure
When entering the blood pressure measurement interface, the bottom green light starts to test for 30 ~ 60 seconds to complete the measurement.
Heart rate
When entering the heart rate measurement interface, the bottom of the bottom green light starts to measure. When the measurement is completed in about 40 seconds, there will be a vibration reminder. If it is prompted, "Please wear it again and try again", you need to wear a watch.
Blood oxygen
When entering the blood oxygen measurement interface, the bottom red light starts to test for 30 ~ 60 seconds to complete the measurement.
Pressure
When entering the pressure measurement interface, the bottom green light starts to test for 30 ~ 60 seconds to complete the measurement reminder.
Physiological period
After the watch is connected to the APP, the opening of women's health reminder on the APP can check the women's health information on the watch.
Exercise
Sport mode options: walking, running, riding , skipping rope, badminton, football, basketball, etc., click the icon to start exercise.
Weather
After the watch is connected to the APP, the weather interface will display the real -time weather temperature and the type of weather in the next 7 days.
Information
After the watch and APP are connected, open the relevant information push on the APP side. The watch can receive the corresponding message push on the side of the watch, which can be saved up to 8 messages.
Music
After the watch is connected to the APP, it can control the suspension and beginning of the mobile phone music player, volume adjustment and song switching.
Timer
In the timing function, the system presets the common timing duration. Users can click the corresponding time fast timing, or you can click the custom button for time settings.
Sleep
Watches show the total sleep last night and the length of light sleep and deep sleep.
Set Up
The setting function contains display (brightness adjustment, screen time, dial switching, main menu view view, turning wrist bright screen), vibration & ringing, not disturbing mode, power saving mode, call, system, about.
Motion Data
Display the number of steps, distance, and calories recorded on the day, and the number of target steps, exercise time, and calories can be set on the APP settings.
Bluetooth call
After the watch is connected to the mobile phone Bluetooth, it is synchronized to the watch after adding a contact with the APP. You can directly dial at the watch contact interface, or you can use the watch to control the phone to call the phone.
Find a mobile phone
After the watch and APP are connected, click to find the phone, and the phone will ring the bell. If the watch is not connected to the APP, the watch will prompt Blue tooth to disconnect.
Control center
Function introduction: screen brightness adjustment, do not disturb mode, power saving mode, settings, flashlight, QR code.

Q&A

1. The watch cannot start Press the power button for more than 6 seconds. The battery may be low. Charge it in time.
2. Bluetooth is not connected or cannot be connected
1) Please try to restart the watch and re-link.
2) Please try to restart Bluetooth and connect again.
3) Don't connect your phone to other Bluetooth devices at the same time.
3.Watch measures heart rate, blood pressure, and blood oxygen data abnormal reason
1) Generally for measurement, the watch sensor and the human body is caused by poor contact.
2) Please pay attention to full contact between the sensor and the wrist during measurement.
4. Abnormal sleep data reason
1) Sleep monitoring simulates people's self-perceived state of falling asleep and waking up, which needs to be worn correctly.
2) If you wear it too late or when you fall asleep, errors may occur.
3) Sleep data is not monitored during the day, and the default sleep monitoring is from 9:30 PM to 12:00 noon the next day.
For more frequently asked questions, please check the App [My >FAQ]
Bluetooth data transmission
When connected to a mobile phone, the watch synchronizes some data, including weather, notifications, sports and health data, with the phone via Bluetooth.When the connection is disconnected or Bluetooth is turned off, the data will not be synchronized.
Note:
1) Do not charge in a humid environment with water
2) please regularly use a clean flannelette to clean the magnetic suction charging hole on the back of the watch, to ensure that the magnetic suction charging hole and magnetic charger fit, to ensure normal charging
3) This product is not equipped with a power adapter, in order to ensure the safety of family and property, when charging, you can use the computer USB interface or choose a power adapter whose output is not more than 5V 1A. Please buy the power adapter through the regular channel,and avoid using the bottom quality and fake power adapter to avoid bursting or fire.
Matters needing attention
1. The measurement results of this product are only for industrial examination and are not used as any medical use or basis. Please follow the doctor's guidance and do not use the measurement results for self-diagnosis and treatment.
2, this product waterproof grade is IP68, can not be used for deep diving and long time in the water. In addition, this product does not put hot water, because the steam will affect the watch.
3. The Company reserves the right to modify the contents of this manual without prior notice. Some functions are different in the corresponding software version. This is normal.

手機 “HAVE FIT” APP的使用注意事項:

  1. 手機 “HAVE FIT” APP內的消息通知設定要容許接收所有種類的訊息
  2. 使用手錶前, 須同時配對連接手機的Bluetooth及手機“HAVE FIT” APP
  3. 使用手錶控制拍照時, 需要打開拍照功能並按紅點兩下
  4. 觀看視頻時如不想聲音在手錶上發聲, 可在手錶中”通話” 設定內把”音樂藍牙”關掉
  5. 用手錶進行SIM咭通話或接聽前, 要先在手機的藍牙連接選"手錶"
  6. 用手錶進行非SIM咭通話或接聽前(例如Wechat, Whatsapp通話), 要先在手機的藍牙連接選"手機"

Tips when using mobile “HAVE FIT”APP:

  1. TURN ON all kinds of messages in the message notification setting of the mobile “HAVE FIT”APP.
  2. Before using the watch, please connect the Bluetooth function and the mobile “HAVE FIT” APP of the phone at the same time.
  3. When using the watch to take photo, you need to turn on the photo function in the watch and press the red dot twice.
  4. When watching video, you can turn off sound of the watch by switching off the” Bluetooth music” function off in the ”call settings” in the watch.
  5. Before making a SIM card call in your watch, select "Watch" in the Bluetooth connection of your phone.
  6. Before making a non-SIM card call (e.g. Wechat, Whatsapp call) in your watch, select "cell phone" in the Bluetooth connection of your phone.