Skip to content
10% OFF H655BT | Hybrid Active Noise Cancelling Bluetooth Headset
33% OFF H655BT | Hybrid Active Noise Cancelling Bluetooth Headset

PJ219 PRO User guide

Scan the QR code to view the operation video

 

Pair Remote

Press the left and right buttons 3s at the same time, the remote light will flash 3 times into paring mode, and the projector to Bluetooth connection page. Wait for the pairing to complete.

Connect WiFi

In the options of the main interface, use the direction button to move to the "Settings" icon on the remote control. After entering the interface, select the "Network" icon, open the switch of "WIFI", find the required WIFI number, enter the password through the virtual keyboard, and confirm the connection.

Connect Bluetooth

In the option of the main interface, use the direction button to move to the "Settings" icon on the remote control. After entering the interface, select the "Bluetooth" icon, open the switch of "Bluetooth", find the Bluetooth name of the required connection, and confirm the connection.

Download APPS

In the main interface of the option, use the direction button to the remote control. Click the "APP Store" and enter into the interface, select the desired APP to download.

Mirroring Screen

For IOS System

In the options of the main interface, use the direction button to move to the "APPs" icon on the remote control. After entering the interface, open the switch of "Air Pin(Pro)". On your IOS mobile device, activate Screen Mirroring/Airplay Mirroring, search for the projector, then select ATV-XXX from the searching result to connect.
(Note: the projector and the IOS mobile device should connect the same router's WiFi.)

For Android System

In the options of the main interface, use the direction button to move to the "APPs" icon on the remote control. After entering the interface, open the switch of "Android Mirroring". On your Android mobile device, search for the projector, then select HAVIT PJ219 PRO from the search result to connect.

 

Bluetooth Speaker

  1. In the options of the main interface, use the direction button to move to the "APPs" icon on the remote control. After entering the interface, open the switch of "Bluetooth Speaker";or press the power button, and open the switch of "Bluetooth Speaker".
  2. On your mobile device, search for the projector, then select PJ219 PRO from the search result to connect.

 

Installation
·Do not install the projector in hot and humid sites.
·Do not install the projector in dust and smoke sites.
·Do not install the projector in sites with direct blowing of warm and cool air-conditioned wind. Otherwise, it may cause the project failure due to moisture condensation or temperature increment.
·Please use the projector with caution to avoid dropping or shocking, which may damage the internal components
Power Supply
·Use the power cord with caution to avoid unduly bending. Damaged power cord may cause electric shock or fire.
·Do not overbend or wind the power cord and avoid placing heavy objects on the power cord, otherwise, the power cord may be broken, resulting in electric shock or fire.
·Unplug the power cord from the outlet after using the projector.
Cleaning
·Unplug the power cord from the projector.
·Use a wet cloth to clean the cabinet regularly. Neutral detergent may be used for serious smudge. Do not use strong detergent or solvent such as alcohol or diluent.
·Use an air brush or lens paper to clean the lens and be careful not to scratch or abrade them.
·The projector will be overheated with blocked dust, causing failure. Please clean the ventilation opening and the loudspeaker regularly with a cleaner.
·Please use the projector with a soft brush. Do not use rigid accessories, such as a crevice cleaning tool, to avoid damage to the projector.
Notes on Fire and Electric Shock
·Make sure of adequate ventilation and blocked outlet to avoid heat accumulation within the projector.
·Prevent foreign objects from falling into the projector, such as paper clips and paper scraps, do not attempt to retrieve any such object. Do not insert any metal object, such as an iron wire or a screwdriver, into the projector. Make sure to immediately turn off the power and ask qualified professional maintenance personnel to remove any object falling into the projector.
·Do not place any liquid on the projector.
Moving
·Please use soft package materials when moving the projector. Also, do not impose severe mechanical vibration on the projector.
High Temperature Warning
·During and after the projection, the temperature near the outlet will rise, therefore touching may cause burns. Do not peep at the lens, or it may cause severe eye injury.