User Guide
Must read before using this product, Please read it carefully and keep it properly. This product instruction manual.
Thank you for purchasing and using our products. For the sake of your safety and interests, Please read this product manual carefully before using the product, standardize the operation, and ensure your Personal safety and property safety. Our company will not be responsible for all losses caused by non-standard operation.
Important Notes:
. When the projector is working, it is forbidden to block the air inlet or outlet , so as to avoid damage to the internal electronic devices caused by the failure of dissipating heat;
. To protect your eyes, do not look at the lens of projector directly.
. To avoid damage of the lens,do not use paper, cloth and other cleaning tools to wipe the lens directly , please use a dust-free cloth or wipe it with alcohol gently.
. Please ensure that the projector is used in a dry and ventilated environment;
. Do not store the projector in an overheated or over-cooled place. High (low) temperature will shorten the service life of electronic devices. The storage and use environment of the projector is allowed to be 0 ~ 40 ℃;
. Do not put the projector into any heating equipment (such as dryer, microwave oven, etc.) to dry;
. Do not drop or hit the product from high altitude to avoid damage to the equipment;
. Please use the power adapter equipped with the product for power supply. If the power adapter is damaged, please contact the manufacturer;
. The power adapter with TPYE-C interface is only suitable for the power supply of this equipment. Do not use it for the power supply of other electronic products.
. If there is any problem with the product, do not disassemble it without permission. Please contact professional after-sales personnel for assistance.
Attention:
If the contents of the manual are inconsistent with the actual product, the actual product shall prevail.If you have any objection to the contents of the manual, please raise a written objection within seven days after purchase. otherwise you are deemed to have agreed, understood and accepted the whole contents of this manual.
This "Product Instruction Manual"provides basic function operation instructions, please refer to the"User Manual" on the home page of the system for detailed operation and other functions.
1. Switch on/off and indicator light description
Method 1: The product purchased is without battery.
Power on: After the projector is powered on, press the power button of the device or the power button on the remote controller for 1 second to start the projector.
Shutdown: Press the power button on the device or remote control for 1 second, and the "Shutdown" icon will pop up on the projection screen. Confirm again to shut down.
Indicator light description:
The indicator lights are available in two colors,
The different operating States of the projector are indicated by a colour change:
.Standby state: the red indicator light is always on.
.Working status of projection: indicator light blue white is always on.
Method 2: The projector purchased is built-in battery.
Long press the power button on the device or the remote controller for 1.5 seconds to turn on/off the projector.
When the projector is powered by an adaptor and powered by a bulit-in battery , the color of the indicator are different .
The projector is powered by the built-in battery and works normally-> the blue light of the indicator light is always on, and the low power-> the red light of the indicator light flashes.
Plug in the power adapter: charging -- > the green indicator light flashes; full charge -- > the green indicator light is always on;
Note: If the interface on the back of the projector body is equipped with ON/OFF toggle switch, please turn the toggle switch to ON first . If it is not turned on, the projector will not work.
2.How to adjust focus for the projector
When the projector is turned on, it focuses automatically
After it is moved, the projector adjusts the focus automatically and keeps the picture clear.
Tilt the projector about 45 °vertically (up and down direction) to activate autofocus;
To disable the autofocus function, please turn off the " Autofocus " button in the " Keystone Correction " section of the Settings screen.
Because of different personal visual perception, there may be differences in the judgment of the clarity of the projection picture.You can use the focus button on the remote control to make minor corrections to the projection clarity,so that the projection picture can achieve the required optimal viewing effect.
Manual focus： When watching a movie, you can use the remote control to adjust the focus manually. Fast focusing: Press the F +/F- key on the remote control for a long time, and the FOCUS icon will appear in the center of the projection screen and rotate rapidly with the F +/F- direction.
3.Remote control instructions
Attention：
Please aim at the projection screen using the remote control. Please pull out of the batteries if you did not use the remote control for a long time.
Pair Remote Control in Bluetooth Mode
1. Please hold the remote near the projector.
2. Press the “Homepage” and “Return” buttons simultaneously for approximately 10 seconds.
3. When the screen displays “√", the remote control is successfully paired.
4. Click the "∧" button on the remote control, a shortcut selection box will pop up, select "User Manual", and you can read the built-in instructions.
